please ask the following questions. you can use hand write or word(Hand write will be better), or Pdf. if you have any questions please read the book.
Book Link：https://neuroself.files.wordpress.com/2020/09/taylor-2005-classical-mechanics.pdf
Category: Physics
When a figure skater goes into a spin, she will begin with her arms extended, and then draws her arms inward. As a result, the ice skater spins faster. Describe why this works in terms of angular momentum.
Provide your own example of the conservation of linear momentum in a collision. Use the words elastic, inelastic, and totally inelastic in your explanation.
Please follow the simple lab report. Also, please include an abstract, introduction, procedure, results, and discussion questions.
The plane carrying the supplies will be cruising at a constant velocity of 250 miles per hour relative to the ground and at a height of 2,650 meters above the target site. Using this information, create a supply drop plan including all required information and calculations outlined below. As you are completing your supply drop plan, remember that correct SI units are a required component of your calculations and descriptions.
Construct a diagram that describes the horizontal and vertical motion of the payload. Your diagram should visually represent the initial velocity and height of the payload as it approaches the drop site. To create the diagrams, you may use drawing tools, or you may photograph or screenshot a drawing of your own. This diagram should include the following elements:
The initial velocity of the payload
The initial height of the payload
Horizontal distance to the drop site
Using your understanding of kinematic equations and the given variables in the scenario, calculate the horizontal and vertical motion of the payload to ensure it arrives at the drop site. In your calculations, account for both the horizontal and vertical motion of the payload. Your calculations should address the following:
Initial velocity of the payload when launched
The velocity of the payload when it hits the ground
Following your calculations, describe the equations used in calculating the vertical and horizontal motion of an object. In your descriptions, address the following:
What is the relationship between vertical and horizontal motion in kinematics equations?
How did you analyze the vertical motion of the payload in your solution?
How did you analyze the horizontal motion of the payload in your solution?
What other kinematics principles did you consider in analyzing the motion of the payload?
Following your initial calculations, your supervisor has asked you to consider two additional scenarios. For both scenarios listed below, adapt your diagrams and descriptions to respond to changing variables. Create a diagram describing the horizontal and vertical motion of the payload in order to reach the drop site, and then use your understanding of kinematic equations to describe how these changes would affect calculations for the payload. The two additional scenarios are described below:
In order to prepare pilots for changes in condition, you have been asked to model supply drops by a plane flying into a headwind. For this scenario, you will choose your own location. Use a resource such as the National Weather Service to select a location. Be sure to name the location and use the wind speed in the area to determine the headwind for the plane. For this scenario, consider the plane’s speed and the height above the drop site to be the same as the first scenario: a speed of 250 miles per hour relative to the ground and at a height of 2,650 meters above the target site.
Due to historical difficulty in delivering supplies by plane, one of your colleagues has suggested you develop a catapult for slinging supplies to affected areas, similar to the electromagnetic lift catapults used to launch planes from aircraft carriers. This catapult is located at a fixed point 400 meters away and 50 meters below the target site. The catapult is capable of launching the payload at 67 meters per second and an initial launch angle of 50 degrees. Using your knowledge of kinematics equations, determine whether this would be sufficient to deliver the payload to the drop site.
Once you have completed your adjusted diagrams and equations, describe the effects of changing variables on kinematic equations. These descriptions should reflect the different motions and considerations made for the modifications you considered in the previous step. In your descriptions, be sure to address the following:
How did the changing variables affect the vertical and horizontal motion of the payload?
What adjustments to delivery would need to be made to account for these changing variables?
Each question must have 50 words.
1. Why is the hospital emergency department sometimes used for non-urgent condition? What are the consequences?
2. What implications has th decline in hospital occupancy rates had for hospital management?
3. Why is it important for hospital administrators to regard outpatient care as a key component of their overall business strategy?
hello please help me. you only need to answer the few questions and graph thats all please and thank you very much. The link and everything is on the pdf.
*****All information is int the document attached.
Shirley A. Jackson is the person I would like the biography done on.
Please write a short essay (500 words maximum) discussing the following:
• Your interest and general knowledge level in theoretical physics and mathematics;
• Relevant courses you have taken in high school, popular science books or articles you have read, extracurricular activities directly related to physics, and any other self-directed learning you have undertaken to further your understanding of physics;
• Other interests and activities you pursue, outside of physics, that demonstrate breadth of character;
• What you hope to learn or gain from attending ISSYP and your plans for the future, including plans for post-secondary education (e.g. where do you see yourself in 5 years? 10 years?).
Background Information about me:
1. I’m currently taking AP Physics 1 and AP Calculus AB and AP Statistics. For Math, I have a good understanding of algebra, calculus, geometry, and statistics and I have been on the school math team since 10th grade. For Physics, I am also preparing for the physics bowl and I have also learned some part of AP Physics 2 on my own. I’m interested in doing algebra and all kinds of calculus questions for math. For physics, I am interested in mechanics and machines.
2. I’m taking AP physics 1 at school, preparing for physics bowl and learned part of ap physics 2 on my own. I have read books like E=Mc2: A Biography of the World’s Most Famous Equation by David Bodanis, A Brief History of Time by Stephen Hawking and Time Travel and Warp Drives: A Scientific Guide to Shortcuts Through Time and Space by Allen Everett and Thomas Roman.
3. I am interested in making robots, I have been in robotics competitions since very young, I can make virtual robots an actual robot. I am in a physics club and doing a project to design and develop a device that can save school energy costs. It is a device that hangs a heavy mass in the air. During the electricity peak, when electricity prices are higher, the device will let the mass drop and transform the gravitational potential energy of the mass into electric power. Contrary, during the electricity valley when electricity prices are much lower, the device can use electricity to pull the mass back up into the air. Theoretically, the device will save some electricity costs for the school.
4. I hope to gain more knowledge in physics and improve my skills. I hope I can be in a good engineering program in college and after graduate make better machines and make our lives more convenient.
please ask the following questions. you can use hand write or word, or Pdf doc. if you have any questions please read the book
Book Link：https://neuroself.files.wordpress.com/2020/09/taylor-2005-classical-mechanics.pdf
You have to write a research proposal on “assessment of Tennant Biomoduator machine to treat chronic diseases”.You have the include the following
1) statement of problem
2) review of research (lit review) talk about the biomudulator and how it came about (Dr Jerry Tennant). Talk about all the attachments that connect to the biomudulato. For example the biotransducer, Y electrode and the hand grips/ foot plates. Talk about advantages of using this therapy in treating chronic diseases such as diabetes in comparison to taking medication.
3) scope of study
4) hypothesis and null hypothesis
5) research design ( include data analysis will be done by interviewing patients that do the treatment presently. Include that I am working in a heath office where this therapy is being administered and I myself perform the treatment on these patients so would gather information and data from their records.)
6) research methodology
7)objectives
This research is based in Trinidad and Tobago.